Corrected tailwheel spring mount plates. I had the outer plate reversed, so I removed the AN3 mount bolts and reversed it so the curved portion of the mount was facing the tailwheel spring.(check the note in the text manual). I retorqued nuts and marked with torque seal. Tailwheel is permanently mounted. I then re- attached the elevator torque tube under station 3 that was taken apart to allow better access to the tailwheel mount bolts. Next, I removed the rudder pedal assembly so the floorboard carpet can be installed next. The rudder pedal assembly goes over the carpet and I will make cut-outs for the mounting blocks and for the brake master cylinder attach plates.